Refresh your home and equipment with our professional Windows, Oven & Hood, BBQ, and Solar Panel cleaning services. Remove dust, grease, and buildup to enjoy healthier, spotless, and more efficient spaces every time!

About This Deal

WINDOWS CLEANING SERVICE:

Step 1 Remove Dust & Debris:

Brush and vacuum the window frame to get rid of dust, cobwebs, and debris.

Step 2 Apply Cleaner:

Spray glass cleaner evenly on the window surface.

Step 3 Scrub & Wipe:

Gently scrub with a sponge and wipe off the cleaner using a glass wiper.

Step 4 Clean the Frame:

Wipe down the window frame to remove any leftover dirt or residue.

OVEN & HOOD CLEANING SERVICE:

Step 1 Clean Grease Filters:

Remove filters, scrub with cleaning solution, rinse, and dry.

Step 2 Clean Hood Surfaces: Wipe both exterior and interior of the hood.

Step 3 Clean Oven Racks & Trays: Apply cleaner, let sit, scrub, and wash removable racks and trays.

Step 4 Steam Oven Interior: Use steam to remove tough stains inside the oven.

Step 5 Wipe Down Surfaces: Remove any leftover cleaner or residue from oven and hood.

Step 6 Test & Dispose: Ensure the oven works properly and safely dispose of waste materials.

BBQ CLEANING SERVICE:

Step 1 Remove & Scrape:

Take out grill parts and scrape off food and grease.

Step 2 Soak & Scrub:

Soak removable parts and scrub to remove buildup.

Step 3 Pressure Wash Exterior:

Use a pressure washer to clean the BBQ exterior.

Step 4 Rinse & Dry:

Rinse all parts and let them dry.

Step 5 Reassemble & Test:

Put everything back and ensure the BBQ works properly.

SOLAR PANEL CLEANING SERVICE:

Step 1 Inspect Panels:

Check for cracks, damage, or loose connections before cleaning.

Step 2 Remove Dust & Debris:

Use a soft brush or blower to remove loose dust, leaves, and debris.

Step 3 Prepare Cleaning Solution:

Use a mild, non-abrasive cleaning solution safe for solar panels.

Step 4 Wash Panels:

Gently scrub the surface with a soft sponge or brush, applying the cleaning solution.

Step 5 Rinse with Water:

Rinse panels thoroughly with clean water to remove all soap and residue.

Step 6 Dry Panels:

Allow panels to air dry or use a soft squeegee to remove excess water.

Step 7 Final Inspection:

Check panels to ensure they are clean and free of streaks and verify that connections are intact.

PLEASE NOTE

* Service is available only in Dubai.

* The customer must provide the Water and power required for cleaning.

* The customer must facilitate Access to the workplace for our staff, vehicle and equipment.

* If required, the Customer must arrange the job's Work Permit or Gate pass.

* The customer must arrange the parking space for our company vehicle (If parking is payable, the customer must pay).

* A minimum order value of AED 150 applies. Orders below this amount will be subject to an additional surcharge.