Choose from the following options for the Arcam FMJ high-end players and amplifiers distributed by Redwood Technologies:

AED 3499 for Arcam FMJ A19 (21% off)

• Continuous power output (20Hz—20kHz at 0.5% THD), per channel
• Both channels, 8Ω, 20Hz—20kHz: 50W
• Single channel, 4Ω, at 1kHz: 90W
• Harmonic distortion, 80% power, 8Ω at 1kHz: 0.003%
• Phono (MM) cartridge
• Input sensitivity at 1kHz: 5mV
• Input impedance: 47kΩ + 100pF
• Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB
• Signal/noise ratio (Awtd) 50W, ref. 5mV input: 80dB
• Overload margin, 50mV at 1kHz: 20dB
• Nominal sensitivity: 1V
• Input impedance: 10kΩ
• Maximum input: 4.6Vrms
• Frequency response: 20Hz—20kHz ± 0.2dB
• Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
• Nominal output level: 630mV
• Output impedance: 230Ω
• Heaphones output
• Maximum output level into 600Ω: 4V
• Output impedance: 1ohm
• Load range: 16Ω—2kΩ
• Accessory power output
• Using accessory power cable supplied, provides two 2.1mm DC connectors: 6V, 1A
• Mains voltage: 110–120V~ or 220–240V~
• Power consumption (maximum): 350W
• Dimensions (including feet): 432mm (W) x 275mm (D) x 85mm (H)
• Weight (net): 8.5kg
• Weight (packed): 10.2kg
• Supplied accessories: Mains lead, CR108 remote control, 2 AAA batteries, accessory power cable

AED 4499 for Arcam FMJ CDS27 (11% off)

• Digital to Analogue conversion: 24-bit 192kHz Delta-Sigma DAC
• Signal to noise ratio: 110dB CCIR
• Harmonic distortion (1kHz): 0.002%
• Frequency response (±0.5dB): 10Hz–20kHz
• Output level (0dB): 2.2Vrms
• Output impedance: 47Ω
• Minimum recommended load: 5kΩ
• Dimensions: W433 x D278 x H87mm
• Weight: 6.2kg nett/8.5kg packed
• Power consumption: 20W maximum
• Digital output connection: 75Ω co-axial optical TOSLINK
• Supplied accessories: mains lead, CR902 remote control, 2 AAA batteries, Wi-Fi antenna
• USB: USB 2.0 High Speed (480 Mbit/s)
• Network: 10 BASE-T / 100 BASE-TX / Wi-Fi

AED 5999 for Arcam FMJ UDP411 (5% off)

• Analogue Audio Output
• Digital to Analogue conversion: 24-bit 192kHz Delta-Sigma DAC
• Signal to noise ratio: 110dB CCIR
• Harmonic distortion (1kHz): 0.002%
• Frequency response (±0.5dB): 10Hz–20kHz
• Output level (0dB): 2.2Vrms
• Output impedance: 47Ω
• Minimum recommended load: 5kΩ
• HDMI: 19-pin HDMI connector
• Supported video formats are: 720 x 576p, 720(1440) x 576i, 720 x 480p, 720(1440) x 480i, 1280 x 720p, 1920 x 1080i, 1920 x 1080p, 3840 x 2160p
• Audio to 8-channel/96kHz or 2-channel/192kHz (24-bit)
• USB: USB 2.0 High Speed (480 Mbit/s)
• Network: 10 BASE-T / 100 BASE-TX
• Dimensions: W433 x D400 x H100mm
• Weight: 6.2kg nett/8.5kg packed
• Power consumption: 20W maximum
• Digital output connection: 75Ω co-axial optical TOSLINK
• Supplied accessories: mains lead, CR301 remote control, 2 AAA batteries, Wi-Fi antenna

AED 8999 for Arcam FMJ A39 (11% off)

• Continuous power output (20Hz—20kHz at 0.5% THD), per channel
• Both channels, 8Ω, 20Hz—20kHz: 120W
• Single channel, 4Ω, at 1kHz: 240W
• Harmonic distortion, 80% power, 8Ω at 1kHz: 0.001%
• Input sensitivity at 1kHz: 5mV
• Input impedance: 47kΩ + 270pF
• Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB
• Signal/Noise ratio (Awtd) 50W, ref. 5mV input: 80dB
• Overload margin, ref. 5mV at 1kHz: 20dB
• Nominal sensitivity: 1V
• Input impedance: 10kΩ
• Maximum input: 4.6V
• Frequency response: 20Hz—20kHz ± 0.2dB
• Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
• Nominal output level: 900mV
• Output impedance: 240Ω
• Maximum output level into 600Ω: 4V
• Output impedance: 1Ω
• Load range: 16Ω—2kΩ
• Accessory power output: 2.1mm DC connector: 6V, 1A
• Mains voltage: 110–120V~ or 220–240V~
• Power consumption (maximum): 1kW
• Dimensions W x D x H (including feet): 433 x 425 x 100mm
• Weight (net): 11.5kg
• Weight (packed): 13.2kg
• Supplied accessories: mains lead, CR902 remote control, 2 AAA batteries, accessory power cable

AED 13399 for Arcam FMJ AVR550 (12% off)

• Continuous power output, per channel, 8Ω (AVR550)
• 2 channels driven, 20Hz - 20kHz, <0.02% THD - 110W
• 2 channels driven, 1kHz, 0.2% THD - 125W
• 7 channels driven, 1kHz, 0.2% THD - 90W
• Residual noise & hum (A-wtd) - <0.15mV
• Signal/noise ratio (A-wtd, stereo direct) - 110dB
• Frequency response - 20Hz—20kHz ± 0.1dB
• HDMI - 7, 1 MHL compatible
• HDMI - Z1 2 (ARC Compatible)
• One Z2
• HDMI - x7, Coax SPDIF - x4, Toslink - x2, RCA Phono - x6,
• 3.5mm aux, USB input, Ethernet Client, Internet Radio, ARC (from display)
• 7.1.4 Pre-amp output - 12x RCA Phono
• Zone 2 output - RCA Phono
• FM / DAB / DAB+
• Dolby Atmos, Dolby Surround
• DTS-HD Master Audio, DTS-ES 6.1 Discrete, DTS-ES 6.1 Matrix, DTS 5.1
• 12V Trigger 2
• IR in 2
• 6V rSeries PSU 1
• Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)
• Power consumption (standby) - <0.5W
• Dimensions: 433mm x 425mm x 171mm
• Weight (net) - 15.5kg
• Weight (packed) - 18.8kg

AED 25999 for Arcam FMJ AV950 (16% off)

• Arcam’s highest performing pre-processor ever
• 4K (UHD) video compatible including upscaling
• 7 HDMI inputs, 2 HDMI outputs, ARC compatible
• Auto setup with room correction
• Arcam’s best ever “stereo” pre-amplifier
• Balanced & single-ended audio outputs
• On board PSU for rSeries accessories
• Ethernet, RS232 and IR control
• Free iOS control app
• Signal/noise ratio (A-wtd, stereo direct) - 110dB
• Frequency response - 20Hz—20kHz ± 0.1dB
• HDMI - 7, Component - 3, Composite - 4
• HDMI - 2 (ARC Compatible), Z2 - 1 (Composite)
• HDMI - 7, Coax SPDIF - 4, Toslink - 2, RCA Phono - 6,
• USB input, Ethernet Client, Internet Radio, ARC (from display)
• 7.1 Pre-amp output - 8 RCA Phono
• 7.1 Pre-amp output - 8 XLR balanced out
• Zone 2 output - RCA Phono
• Radio tuner